User Manual
Table Of Contents
- Part I. Getting started
- Chapter 1. – Getting Started
- Chapter 2. - GMRS Information and FCC Declaration
- Chapter 3. – Basic Shortcuts and Use
- Chapter 4. – Menu Quick Review
- Chapter 5. – Programming
- Chapter 6. – Other Settings
- Toggle from High to Low Power
- Storing an FM Radio Station and Scanning
- Keypad Lock-out
- PTT ID Setting
- DTMF RX Settings
- DTMF TX Settings
- Remote Stun
- Remote Kill
- Remote Revive
- Read More About Remote Commands
- DTMF Receive Settings, Transmit Setting (Call Key)
- 2TONE Receive Settings, Transmit Setting (Call Key)
- 5Tone Receive Settings, Transmit Setting (Call Key)
- Scanning modes
- SKIP Scanning Channels
- Scanning a Frequency Range (VFO Mode)
- Tone Scanning
- Dual, Tri, and Quad Watch (TMR)
- Chapter 7. - Selective calling
- Part III. How-to and setup guides.
- Chapter 8. - Repeaters
- Chapter 9. - Customization
- Appendix A. - Menu definitions
- Appendix B. - Technical specifications
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
51
• Tone-burst (1000Hz, 1450Hz, 1750Hz, 2100Hz)
Using these features does NOT mean that others won't be able to listen in on your
transmissions.
They only provide a method to filter out unwanted incoming transmissions. Any
communications made while using these features will still be heard by anyone not
employing filtering options of their own.
You can change the CTCSS or DCS settings while in memory (MR) mode.
CTCSS and 1750Hz tone-burst are also popular methods among amateur radio operators to open
up repeaters.
CTCSS
CTCSS is set with menus 11 R-CTCS and 13 T-CTCS.
Procedure 8.1. CTCSS setup how-to
1. Press the key to enter the menu.