User Manual
Table Of Contents
- Part I. Getting started
- Chapter 1. – Getting Started
- Chapter 2. - GMRS Information and FCC Declaration
- Chapter 3. – Basic Shortcuts and Use
- Chapter 4. – Menu Quick Review
- Chapter 5. – Programming
- Chapter 6. – Other Settings
- Toggle from High to Low Power
- Storing an FM Radio Station and Scanning
- Keypad Lock-out
- PTT ID Setting
- DTMF RX Settings
- DTMF TX Settings
- Remote Stun
- Remote Kill
- Remote Revive
- Read More About Remote Commands
- DTMF Receive Settings, Transmit Setting (Call Key)
- 2TONE Receive Settings, Transmit Setting (Call Key)
- 5Tone Receive Settings, Transmit Setting (Call Key)
- Scanning modes
- SKIP Scanning Channels
- Scanning a Frequency Range (VFO Mode)
- Tone Scanning
- Dual, Tri, and Quad Watch (TMR)
- Chapter 7. - Selective calling
- Part III. How-to and setup guides.
- Chapter 8. - Repeaters
- Chapter 9. - Customization
- Appendix A. - Menu definitions
- Appendix B. - Technical specifications
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
63
OFF
Keypad Auto Lock Disabled
5
TOT
TX Time Out Timer
15 > 600 secs
15 second steps
6
APO
Auto Power Off
30, 60 > 300
Time Set that radio will Power Off after last signal
received.
minutes
OFF
Turn off APO Option
7
WN
Bandwidth
Wideband
25.0 kHz
Narrowband
12.5 kHz
8
ABR
Unused Setting
9
BEEP
Keypad Voice Prompt
ON / OFF
Turn ON / OFF keypad voice prompt
10
R-DCS
Receive - Digital Coded
Squelch
D023N > D754I
Squelch opens when proper DCS code is detected
OFF
No DCS code required
11
R-CTCS
Receive - Analog Tone Squelch
67.0 > 254.1 Hz
Squelch opens when proper CTCSS tone detected
OFF
No CTCSS tone required
12
T-DCS
Transmit - DCS Code
D023N > D754I
Transmits specified code
OFF
No DCS code transmitted
13
T-CTCS
Transmit - CTCSS Code
67.0 > 254.1 Hz
Transmits specified tone
OFF
No CTCSS tone transmitted