User's Manual

44!
VISIT!BAOFENGTECH.COM!AND!MIKLOR.COM!FOR!DOWNLOADS!AND!HELP!
!
!
!
UV-25X2!/!UV-25X4!/!UV-50X2!
!
! !
scanned.%In%other%words:%this%would%be%done%by%listening%to%stations%on%the%repeater's%input%
frequency.!
Scanning!for!CTCSS!Tone!!
(ACTIVE%SIGNAL%REQUIRED)%
1. Press!the! !key!to!enter!the!menu.!
2. Enter! !on!your!numeric!keypad!to!come!to!Menu!11:!R-CTCS!
3. Press!the! !key!to!select.!
4. Press!the! !to!begin!CTCSS!scanning!
A!flashing!"CT"!will!be!in!the!left!status!display!to!indicate!the!radio!is!in!CTCSS!scanning!mode.!In!
this!mode,!whenever!the!radio!is!receiving!an!RF!signal!on!the!selected!MR!channel!or!VFO!
frequency,!the!lower!display!will!cycle!through!the!CTCSS!tones!as!they!are!being!tested.!Once!the!
frequency!of!the!received!CTCSS!tone!is!determined,!the!"CT"!indicator!will!stop!flashing.!!
!
Press!the! !key!to!save!the!scanned!tone!into!memory!(VFO!Mode!Only)!then!press!the! !key!
to!exit!the!menu.!
!
Don't%forget%to%set%VFO%menu%11%back%to%OFF%when%the%CTCSS%tone%is%no%longer%required.%
!
!
!