User's Manual
Table Of Contents
- 1 GENERAL INFORMATION
- 2 INTRODUCTION
- 3 GENERAL DESCRIPTION
- 4 INSTALLATION
- 4.1 SYSTEM INSTALLATION OVERVIEW
- 4.2 REMOTE UNIT INSTALLATION
- 4.3 HOST UNIT INSTALLATION
- 4.4 NMS INSTALLATION
- 5 mBSC DAS SYSTEM START-UP
- 6 Maintenance
- 7 CUSTOMER SERVICE CONTACT INFORMATION
mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 13
uses SNMPv2.0 protocol to transmit automated traps to the operator's Network Operations Center for
remote alarming and system queries. These two capabilities provide for centralized configuration and
alarm monitoring of the entire system.
Operational parameters, such as uplink and downlink, and gain can be set through the NMS server. Status
information at each node is easily available. The customer can readily access power output, ALC status,
VSWR, PA temperature, and other basic operating parameters, The BTI NMS simplifies the configuration
of the network by providing accurate downlink power and uplink gain updates. This allows the system
operator to maximize the efficient use of field personnel when diagnosing system performance issues.
Figure 3-6. NMS Login Interface