User's Manual

Table Of Contents

mBSC-H DAS System

Installation Manual Issue 7

 SLAVE Remote Unit:

 No Fiber Optic Cable connection with the Host Unit

 Interfaces with the Master Unit for downlink and uplink signal

 Unused ports (TX_OUT, RX_IN) are blocked with a cover.

Figure 3-8. User Interface of MASTER Remote Unit

Table -3-3. Master Remote Unit User Interface

Label Name

Description

ANT

Interface port for Antenna Feed line

OPERATE

LED indicator for normal or critical fault status of the RU.

Normal: Green ON, Critical fault: Red ON

TX_Out

RF output port to provide the input signal to the Slave Remote Unit when Dual or

Triple Band application is configured.

RX_In

RF input port to provide the output signal to the Master Remote Unit when Dual

or Triple Band application is configured.

FIBER

Fiber Optic Cable interface port for combined downlink and uplink signal

POWER

Interface port for the AC 110/220V power cable

DC_FAN

Provides power to the fan

VENT

Port for the balance of pressure inside and outside of the enclosure

Figure 3-9. User Interface of SLAVE Remote Unit