User's Manual

mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 20
installation. Table 4-2 lists the mounting hardware provided by the manufacturer for a standard BTI pole
mount installation kit. Additional hardware may be needed, depending on the site requirements, and may
be ordered through Customer Service (Section 6).
Table 4-2. Single-Band RU Mounting Hardware and Fasteners
for a standard BTI pole mount installation kit
Hardware and Fasteners
Quantity
Rec'd
MOUNTING PANEL
(Configurable)
1
I-BEAM or U-BEAM/CHANNEL
MOUNTING BRACKETS
2
SHROUD COVER
1
M5 SCREW
8
M5 LOCK WASHER
8
M5 FLAT WASHER
8
M6 SCREW
8
M6 LOCK WASHER
8
M6 FLAT WASHER
8
M8 SCREW
8
M8 LOCK WASHER
8
M8 FLAT WASHER
8
M12 SCREW
4
M12 LOCK WASHER
4
M12 FLAT WASHER
4
JUNCTION BOX
1
RF CABLE (Designated Slave Unit)
2
FIBER OPTIC COWL
1
POWER CABLE (10 FEET)
1
FAN CONNECTOR (OPTIONAL)
1
Table 4-3. Specified Hardware Torque
Type
Screws
Hex Nuts
Spacers
Spring/Lock Washers
Spacers
Flat Washers
Thread
M5
M8
M12
M5
M8
M12
M5
M8
M12
Specified
Torques
(lb. - ft.)
2
12
40
2
12
40
2
12
40
The following is a list of tools and any additional materials required for mounting every Single-Band
Remote Unit configuration:
 DIN male connectors
 Tool kit for attaching DIN connectors to coaxial cable
 Tools for installing exterior AC circuit
 Tools for securing M5 screw