User's Manual

Table Of Contents

mBSC-H DAS System

Installation Manual Issue 7

4.2.4 Mechanical Installation

4.2.4.1 Mechanical Safety Precautions

Please read the general Safety Precautions contained in Section 1.2 Safety Precautions

1. Follow the procedures provided by the manufacturer when installing the Remote Unit. Do not

install the Unit in a place or in a manner that does not meet the manufacturer's provided

specifications.

2. Use the mounting hardware supplied by the manufacturer. If non-standard mounting hardware

is used, it must meet the requirements for mounting the Unit as specified by the manufacturer.

NOTE: It is important that specified load limits for the Unit are not exceeded as this may

void the warranty.

3. Safety measures for lifting heavy materials should be followed to prevent injury.

4. High temperatures may occur due to power dissipation. Please follow the specifications for

proper Remote Unit ventilation as indicated by the manufacturer.

5. Check that the mains supply is disconnected, before connecting or disconnecting the main

power connector at the Remote Unit.

6. Do not block airflow ventilation outlets during installation or Remote Unit(s) may sustain

critical damage.