User's Manual

Table Of Contents

mBSC-H DAS System

Installation Manual Issue 7

NOTE: Check particularly for any damage to the fiber optic connectors on the FIU

module. Check the power connectors located at the back of the Host Unit and check

the back plane connectors located inside the Host Unit for any damage.

4.3.4 Electrical Installation

4.3.4.1 Electrical Safety Precautions

Please read the general Safety Precautions presented in Section 1.2 Safety Precautions

1. Follow the instructions for installation provided in this manual to prevent serious

accidents including loss of life, severe personal injury or extensive property damage.

2. The Unit must be grounded before connecting any power supply. Grounding is a

required precautionary measure. Grounding instructions are provided and should be

followed for safety.

3. Electrical and electronic components can be destroyed by incorrectly wired connections.

4. Cable connector materials must meet manufacturer specifications to avoid corrosion at the

connectors.

5. Compliance with the surge requirement of EN 61000-4-5 (fine protection) has been met by this

Unit. Installing additional external surge protection, depending on the individual application, via

local supply connection and/or coarse protection is recommended to avoid damage caused by

electrical surges.