User's Manual

mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 51
4.4 NMS INSTALLATION
Caution: Network security may be compromised when accessing external Internet
connectivity. The use of established security software is recommended.
The NMS software is pre-installed on the Network Management Server and the NMS server arrives
pre-installed in the optional Host Unit cabinet. This section provides instruction for installing the NMS
software on a customer laptop or desktop and setting initial software parameters.
Figure 4-31. NMS Server
4.4.1 Installation Overview
The installation of the Network Management System consists of the following steps:
Table 4-11. NMS Installation Overview
Step
Operation Type
Operation Action
1
SYSTEM SET-UP
VERIFY SERVER SOFTWARE IS OPERATIONAL
2
SYSTEM SET-UP
INSTALL SYSTEM SOFTWARE ON TO CUSTOMER
MONITORING EQUIPMENT
3
SYSTEM SET-UP
LAUNCH NMS SOFTWARE
4
CONFIGURE
CONFIGURE MANAGER ACCOUNT
5
CONFIGURE
SET-UP USER ACCOUNTS
6
CONFIGURE
SOFTWARE SYSTEM PARAMETERS
7
UPDATE/UPGRADE
SOFTWARE/FIRMWARE UPGRADE INSTALL
8
INITIAL SOFTWARE
INSTALLATION
REVIEW
CONFIRM SOFTWARE SET-UP INSTALLATION, TABLE 4-13
NMS INITIAL SOFTWARE INSTALLATION CHECKLIST
9
UPGRADE
INSTALLATION
REVIEW
CONFIRM FIRMWARE UPDATE AND SOFTWARE UPGRADE
INSTALLATION, TABLE 4-14 NMS UPGRADE SOFTWARE
INSTALLATION CHECKLIST
10
TROUBLESHOOTING
INSTALLATION TROUBLESHOOTING GUIDE
4.4.2 Installation Hardware and Tools
The NMS server is shipped pre-installed in the optional Host Unit cabinet. Table 4-12 lists the accessories
provided by the manufacturer. Additional accessories may be needed, depending on the site requirements,
and may be ordered through Customer Service (Section 6).
Table 4-12. NMS Cables and Accessories
NMS ACCESSORY
Quantity
Received
SOFTWARE CD-ROM
1