User's Manual
Table Of Contents
- 1 GENERAL INFORMATION
- 2 INTRODUCTION
- 3 GENERAL DESCRIPTION
- 4 INSTALLATION
- 4.1 SYSTEM INSTALLATION OVERVIEW
- 4.2 REMOTE UNIT INSTALLATION
- 4.3 HOST UNIT INSTALLATION
- 4.4 NMS INSTALLATION
- 5 mBSC DAS SYSTEM START-UP
- 6 Maintenance
- 7 CUSTOMER SERVICE CONTACT INFORMATION
mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 53
1. Connect the laptop, PC or terminal to the server through the hub using a crossover cable, Figure 4-33.
The monitoring device may also be plugged directly into the server with a crossover cable.
Figure 4-33. Connecting the Monitoring Device to the Server
2. Locate the NMS icon on the screen of the monitoring device, Figure 4-34.
Figure 4-34. Locate NMS Icon
4.4.5 Initial System Setup
4.4.5.1 CD-ROM Install
The CD-ROM install is used to install NMS on to a Laptop or Desktop Computer. Use the following
procedure to install the application on to the computer:
1. Open the CD drive on the machine.
2. Place the CD into the drive and close the drive.
3. The CD will begin the install wizard, Figure 4-35.
4. The wizard copies the files to the %ProgramFiles% folder. The default destination directory may be
changed, if desired.