User's Manual

mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 55
Figure 4-37. NMS Desktop Shortcut
NOTE: Occasionally, there are compatibility problems that cause a configuration
conflict when setting up the NMS. Follow the steps shown in the Troubleshooting
Guide. If this does not resolve the issue, contact Customer Service (Section 6).
4. Verify that the Advance box is checked and then click in the password field, Figure 4-38.
5. Enter the following default password: 1
6. Click on OK. The NMS Command Console is then launched.
Figure 4-38. NMS Login Screen
4.4.6 Initial Start-up Configuration
Once NMS is installed on the machine, the command console or main screen is used to navigate through
various NMS menus to configure both the software system parameters and the DAS system parameters.
This section covers the software system parameters needed to set-up an initial install.
Main access to the NMS software configuration is through the System(S) drop down on the Menu bar as
shown in Figure 4-39. User accounts may also be accessed through the User Icon on the Command
toolbar as shown in Figure 4-40. The software system configuration includes the ability to access the