User's Manual
Table Of Contents
- 1 GENERAL INFORMATION
- 2 INTRODUCTION
- 3 GENERAL DESCRIPTION
- 4 INSTALLATION
- 4.1 SYSTEM INSTALLATION OVERVIEW
- 4.2 REMOTE UNIT INSTALLATION
- 4.3 HOST UNIT INSTALLATION
- 4.4 NMS INSTALLATION
- 5 mBSC DAS SYSTEM START-UP
- 6 Maintenance
- 7 CUSTOMER SERVICE CONTACT INFORMATION
mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 62
Figure 4-45. Enter User name and Password
Note: There is a limit of 20 Alpha-Numeric characters for both User name and
password entries. User names are selectable from the Login screen drop down
menu, once entered into the system. Passwords are case sensitive.
3. Additional detailed information for managing User accounts, including deleting and modifying User
accounts is contained in the NMS User Manual.
4.4.6.3 Configure Software Parameters
The NMS system software parameter defaults allow the user to focus less on configuring the software
system , Figure 4-46, and more on the critical functionality for the DAS system. The NMS is designed to
run in a background mode when the SNMP option is activated. The background mode allows constant
communication with the NOC while leaving the user's device accessible. The NMS icon resides in the Icon
Tray in the status bar of the user's device.
Detailed parameter information is available in the NMS User Manual.