User's Manual
Table Of Contents
- 1 GENERAL INFORMATION
- 2 INTRODUCTION
- 3 GENERAL DESCRIPTION
- 4 INSTALLATION
- 4.1 SYSTEM INSTALLATION OVERVIEW
- 4.2 REMOTE UNIT INSTALLATION
- 4.3 HOST UNIT INSTALLATION
- 4.4 NMS INSTALLATION
- 5 mBSC DAS SYSTEM START-UP
- 6 Maintenance
- 7 CUSTOMER SERVICE CONTACT INFORMATION
mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 64
3. Log into the NMS System.
4. Click on NetConfig
5. Using the RemoteSoftwareDownload interface, Figure 4-47, Locate the file by clicking on the browse
button.
Figure 4-47. Remote Software Download Screen
6. Click Start Download. The firmware update may be paused if needed by clicking the Pause button.
7. Once the download is complete, click Return.
4.4.8 Software Upgrade Installation
4.4.8.1 CD-ROM Install
The CD-ROM Upgrade install is a quick and simple installation. Use the following procedure to install the
application on to the computer:
1. Check that no instance of NMS is running.
2. Open the CD drive on the machine.
3. Place the CD into the drive and close the drive.
4. The CD will begin the install wizard and ask if the user would like to overwrite the older NMS version,
Figure 4-48.