User's Manual
Table Of Contents
- 1 GENERAL INFORMATION
- 2 INTRODUCTION
- 3 GENERAL DESCRIPTION
- 4 INSTALLATION
- 4.1 SYSTEM INSTALLATION OVERVIEW
- 4.2 REMOTE UNIT INSTALLATION
- 4.3 HOST UNIT INSTALLATION
- 4.4 NMS INSTALLATION
- 5 mBSC DAS SYSTEM START-UP
- 6 Maintenance
- 7 CUSTOMER SERVICE CONTACT INFORMATION
mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 71
Figure 5-4. Manually Enter the IP Address
6. Click OK.
5.2 INITIAL NETWORK CONFIGURATION
Once installed and software configurations are complete, the network must be configured and activated.
The first half of this section details the initial functions necessary for a basic system activation through the
NMS. The second half details in-depth information for network system parameters. Access to the DAS
system configuration Net Config Manager is through the Network(N) menu bar drop-down or the Net
Config Command bar button, Figure 5-5, the ALT key + (N) or the Netconfig Icon on the Command bar.
The DAS Net Config Manager includes the ability to access the following functions:
Add/Modify/Delete Sites
Add/Modify/Delete the Host Unit(s)
Add/Modify/Delete the Remote Unit(s)