User's Manual
Table Of Contents
- 1 GENERAL INFORMATION
- 2 INTRODUCTION
- 3 GENERAL DESCRIPTION
- 4 INSTALLATION
- 4.1 SYSTEM INSTALLATION OVERVIEW
- 4.2 REMOTE UNIT INSTALLATION
- 4.3 HOST UNIT INSTALLATION
- 4.4 NMS INSTALLATION
- 5 mBSC DAS SYSTEM START-UP
- 6 Maintenance
- 7 CUSTOMER SERVICE CONTACT INFORMATION
mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 73
Figure 5-6. BTI Example System Configuration
5.2.1 Add a Site
The highest level of system configuration is defined by adding a Site Caption and a Site Code. The Site
Caption alpha-numeric text field accepts any user-defined descriptive name (30 alpha-numeric character
limit) and the Site Code accepts integer values only (1 through 9999 numeric limit). The following steps are
used to add the Site Caption and Site Code:
1. Access the Network Config screen, Figure 5-5, via the NetConfig Icon on the Command bar, using ALT
+ (N) or the Network(N) menu drop-down.
2. Click on the Site button in the Select Information field,, Figure 5-7.
3. Enter the Site Caption (Customer defined Site Name) and the Site Code (Customer defined Site
Number). The example, BTI_Example_Cypress_Site is shown in Figure 5-8.
4. Click Add to save the Site Caption and Site Code.