User's Manual
Table Of Contents
- 1 GENERAL INFORMATION
- 2 INTRODUCTION
- 3 GENERAL DESCRIPTION
- 4 INSTALLATION
- 4.1 SYSTEM INSTALLATION OVERVIEW
- 4.2 REMOTE UNIT INSTALLATION
- 4.3 HOST UNIT INSTALLATION
- 4.4 NMS INSTALLATION
- 5 mBSC DAS SYSTEM START-UP
- 6 Maintenance
- 7 CUSTOMER SERVICE CONTACT INFORMATION
mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 75
Figure 5-8 Adding a Site
5.2.2 Add a Host Unit
Once the Site Caption and Site Code have been configured, the Host Unit should be added to the system.
The HU Caption alpha-numeric text field accepts any user-defined descriptive HU Caption (20
alpha-numeric character limit) and HU No. accepts integer values only (1 through 9999 numeric limit). The
following steps provide the Host Unit configuration:
1. Click on Equipment to bring up the new information section for the DAS System equipment.
2. Click on HU in the Select Equipment section. Verify that the Site Caption and Site Code are correct for
the Host Unit being added.
3. Add the customer designated HU Caption and HU No. as shown in Figure 5-9.