User's Manual
Table Of Contents
- 1 GENERAL INFORMATION
- 2 INTRODUCTION
- 3 GENERAL DESCRIPTION
- 4 INSTALLATION
- 4.1 SYSTEM INSTALLATION OVERVIEW
- 4.2 REMOTE UNIT INSTALLATION
- 4.3 HOST UNIT INSTALLATION
- 4.4 NMS INSTALLATION
- 5 mBSC DAS SYSTEM START-UP
- 6 Maintenance
- 7 CUSTOMER SERVICE CONTACT INFORMATION
mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 81
Figure 5-14. IP Address Update Setting
5.2.4 Map the IP Address to the NMS Software
1. Click the Netconfig button.
2. Select the Host Unit. Figure 5-15.
3. Change the IP Address(HU) from the default value to the designated network IP address. This will map
the IP Address in the NMS System to the HU hardware card.
4. Then Click Modify. Click Return
5. Restart NMS to set the new parameters.