User's Manual

mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 83
Figure 5-16. Confirm IP Address Update Accepted.
5.2.5 Adding a Master and/or a Slave Remote Unit
Once the Site Caption, Site Code, and Host Unit have been configured, the Master Remote Unit should be
added to the system first, followed by any Slave Remote Units. The RU Caption alpha-numeric text field
accepts the default RU Caption or any user-defined descriptive RU Caption (20 alpha-numeric character
limit) and the RU No. field accepts integer values only (1 through 9999 numeric limit). NMS creates a
default name using a combination of representative letters and numbers in the following format:
S#F#_MRU###(#)
[Slot#][Fiber # designation]_[MasterRU][Frequency]
The example in Illustration 5-17, S4F2_MRU850 shows the default name with an M designator for
Master.
S#F#_SRU###(#)
[Slot#][Fiber designation]_[SlaveRU][Frequency]
The example in Illustration 5-18, S4F2_SRU1900 shows the default name with an S designator for Slave.
5.2.5.1 Adding a Remote Unit
Use the following steps to define the Remote Unit configuration:
1. Click on the new HU in the System Net section.
2. Click on Equipment to bring up the new information section for the DAS System equipment.