User's Manual
Table Of Contents
- 1 GENERAL INFORMATION
- 2 INTRODUCTION
- 3 GENERAL DESCRIPTION
- 4 INSTALLATION
- 4.1 SYSTEM INSTALLATION OVERVIEW
- 4.2 REMOTE UNIT INSTALLATION
- 4.3 HOST UNIT INSTALLATION
- 4.4 NMS INSTALLATION
- 5 mBSC DAS SYSTEM START-UP
- 6 Maintenance
- 7 CUSTOMER SERVICE CONTACT INFORMATION
mBSC-H DAS System
Installation Manual Issue 7
© 2009-2014, BTI Wireless Page 91
5.3.3 System Activation Review
Table 5-4. System Start-up Review
Items
Description
1
Verify that the Host Unit communication was established.
2
Confirm that at least one Site has been added.
3
Verify that the Host Unit Hardware card IP address has been configured.
4
Check that the Remote Unit is communicating with the Host Unit
5
Confirm that the Host Unit is connected to the Server.