User's Manual

mBSC081921-12 System

Operation Manual Issue 2

Caution: When the system was shipped out, the IP address was pre-defined with

default. The customer should changed HU IP address with user defined one.

• Note: the IP address of Host Unit is pre-defined when the product is shipped to the

customer. The customer can change the default IP address of HU to user defined IP

address.

Figure 3-9. Result Window after adding HU

7. After adding Host Unit, Remote units are required to add in the system configuration with same

way for adding HU, as shown in Figure 3-10.

Figure 3-10. Add the Remote Unit below the Host Unit Tree