User's Manual
mBSC081921-12 System
Operation Manual Issue 2
© 2009, Bravo Tech Inc. Page 18
There is the rule to define the Equipment Code for Remote Unit.
Warning: Equipment Code for RU should be followed the numbering rule for normal
operation. The conflicted Cdoe may casue for the failure of configuration of the system.
• The code will be defined with the combination of Slot ID and Port number for FIU
module in Host Unit as shown in Table 3-1. Maximum 6 FIU modules can be installed in
one HU. And the slot number is started with “1” from the left side module to right side
module.
Table 3-1. Rule for numbering the Equipment Code
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
FC/APC1 0
FC/APC2 1
Slot #1 0 0 1
Slot #2 0 1 0
Slot #3 0 1 1
Slot #4 1 0 0
Slot #5 1 0 1
Slot #6
1 1 0
RU
Information
0 0 0 0
Note
1.
Slot # is numbered sequentially starting “1” from left side slot in HU
8. Figure 3-11 shows the completion of the system configuration and adding Host unit and Remote
Units in NMS.
Figure 3-11. Completion of the System Configuration