Instruction manual

7.1.7 Video Door Entry Section
In this section is configured the possible video door entry system.
For single configurations, please refer to the use instruction manual of the PABX
switchboard.
It is possible to define the system to be realised (corresponding to one of the wiring
diagrams included in the Video Signal Distributor's manual), by simply inserting the code
into its special space and then pressing the Load key.
Note:
The acronym PRI in the mask indicates the Main External Station (riser or dedicated).
The indication Cito in the mask indicates the enabling / disabling of the switching on and
door lock control of the external stations.
Manuale Tipbx 5.4 Pag. 68