Instruction manual

6.2.3 Automatic Answering
The selections carried out in step 5 of the guided configuration are resumed and
increased.
For the different services quoted in the page, refer to PABX telephone exchange use
instruction manual.
Activating the Remote control service on local line 1 the caller identification service
(CLID) cannot be activated.
The Remote control service and Recognition of fax tone services cannot be activated
at the same time on the same local line.
To activate the Remote control service at least one auxiliary relay must be configured
as being able to be remotely activated.
To activate the Recognition of fax tone service at least one extension must be
configured as Fax, in contrary case the service does not work.
Caution, in the service control procedure the extensions will be configured as FAX. If
they are also to be configured as modem or answering machine see the “Extension
type” page.
On activating the DOSA service you can decide whether to enable opening the door
lock from the remote telephone or not (see Enable opening door lock on DOSA)
Note: If the DOSA service is activated make sure that the corresponding telephone
number has been configured in the Emergency numbers section.
Manuale Tipbx 5.4 Pag. 71