Instruction manual

6.5 Scenes
In PABX telephone exchanges, 4 further scenes are available to configure the indoor
extensions
These scenes are configurable by activating the appropriate button on the tool bar.
The following configurations are at user’s disposal:
Enabling of the single extension to outgoing calls
Enabling of the single extension to incoming calls
Automatic answering
To activate the single scene, see the PABX telephone exchange use instruction
manual.
Also, the function copy scene is at user’s disposal, that is that the data of a selected scene
are copied in the current one.
This function is activable by means of the appropriate button on the tool bar; the following
mask is shown to the user:
After the desired scene has been selected and after pressing the Ok button, the data are
copied in the current scene.
Manuale Tipbx 5.4 Pag. 79