Installation manual

Confi guration
DEVICE CONFIGURATION
The sensors and actuators must be correctly confi gured so that they can
perform the function required. In practice to confi gure means defi ning:
For the sensors:
1 the relevant zone, within the Temperature control function
2 the pump control mode
3 the mode of operation (heating, cooling, etc.)
4 the pump switching on delay (if necessary)
numbered
configurator
configurator
socket
tool to insert the
configurator
SENSOR CONFIGURATION ACTUATOR CONFIGURATION
For the actuators:
a) the relevant zone
b) the type of load to manage.
This procedure, called confi guration, is performed by inserting push-
in components called confi gurators in the sockets on the devices. The
confi gurators are differentiated by their colour or number and code printed
on the body itself.
CONFIGURATOR OVERVIEW
numbered
configurator
description of the
configurator sockets
tool to insert the
configurator
26
MY HOME TEMPERATURE CONTROL