Installation manual

SENSOR ITEM L/N/NT4692
As required the sensor can be installed in either normal fl ush-mounted or
wall-mounted containers. For both solutions the installation height must
be about 1.5 metres from the fl oor and away from zones which could
infl uence the temperature reading. Wall installation may be useful to solve
the problem of already existing BUS systems which cannot be expanded.
This type of container avoids the need for wall work and is available in both
Living International and Light series. To install the devices in the wall boxes
correctly the protection cover on the bottom of the item must be removed.
The anti-tamper device should also be removed from the wall-mounted
boxes (only useful when using with burglar alarm items).
CORRECT MODE OF INSTALLATION
EXAMPLE OF FLUSH-MOUNTED INSTALLATION
EXAMPLE OF WALL-MOUNTED INSTALLATION
wall-mounted
box complete
with frame
remove anti-tamper
device
sensor Living International
2-module cover plate
flush-mounted
box 503E
2-module
support
sensor Light 2-module cover
plate
OFF
h. 1,5m
ok!
OFF
OFF
63
TECHNICAL FEATURES
CATALOGUE MY HOME TEMPERATURE CONTROL