User Manual

８
circuit boards and cause and can accuse the multi meter to work improperly.
4) When take current measurement, keep the cable at the center of the clamp
will get more accurate test result.
5) Keep the multi meter away from dust and dirt, which can cause premature
wear of parts.
6) Wipe the multi meter with a damp cloth occasionally to keep it looking new.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the multi meter.
7) Use only fresh batteries of the required size and type. Always remove old
or weak batteries. They can leak chemicals that destroy electronic circuits.
8) Please take out the battery when not using for a long time.
4.2 9Volt battery replacement
1) Ensure the instrument is not connected to any external circuit. Set the
selector switch to "OFF" position and remove the test leads from the
terminals.
2) Open the cover of the battery cabinet by a screwdriver.
3) Replace the old batteries with the same type batteries.
4) Close the battery cabinet cover and fasten the screw.
Above picture and content just for your reference. Please be subject to
the actual products if anything different or updated. Please pardon for
not informing in advance.