User Manual

ManualsBrandsBTMETER ManualsIndustrial & ScientificWire Tracker Tone Generator - BTMETER BT-5900A Cable Finder for RJ11 RJ45 Ethernet LAN Network Cable Telephone Line Tester Toner Probe Kit , Continuity Checker

Safety instructions

In order to avoid and prevent electric shock, burns or personal

injury, please read this manual carefully.

Note: the condition that may cause damage to instrument or error

detection results.

Warning: is the situation may cause harm to the user or action.

Notice

Electrical contact may cause electrical shocks, severe injury

or death. In order to avoid personal injury or death caused by

electric shock, please operate strictly according to instructions.

Please read all the contents of this manual carefully.

Please use the product according to this manual, otherwise,

the protection function provided by this product will be invalid or

weakened.

Please do not use the test line for damage or metal

exposure.

If the product is damaged, such as shell rupture, please don't

use it.

Do not use this product in power storm, wet weather or

thunderstorm weather.

The cable lines do not use this product with a strong

detection (such as the 220V power line).

Do not use this product in the presence of flammable gas,

high dust or water vapor.

Do not access the power supply beyond the detection

operating voltage range.

Do not use incorrect products with no battery back cover or

rear lid.

Must be the test line and the measured line open the battery

cover before separation.

Do not try to repair this product, this product does not

contain the user's own replacement parts.

For your safety, please bear in mind "safety first":

Voltage over 30V AC or 60V DC can cause electric shock.

The use of appropriate personal protective equipment, such

as: safety glasses, masks, insulation gloves, insulation boots and

insulation pads.

When charged, don't make yourself grounded.

When using the crocodile clip test line or adapter jumper, always

connect the ground wire to the zero line.

Summary

This instrument is a multi-functional handheld cable testing tool.

The cable type is enhanced, the function is more, and the scope

of application is wider. It is a necessary testing tool for Telecom

engineers, wiring engineers, network maintenance personnel,

etc..

major function

Line finding function: it can directly find the line of RJ11,

RJ45 and BNC interface cable, and can find the line of other

metal wire through adapter.

When the cable line is searched, it is not necessary to peel

off the outer line of the line, so it is simple, fast and can judge the

location of the breakpoint of the line.

It can be used to find the line of any weak Ethernet device,

such as Ethernet switch, router and so on.

Detecting network cable: it can detect the line sequence of

the network cable completely, detect the disconnection, short

circuit, wrong, reverse connection and winding error of the

network cable.

Line level and positive and negative polarity detection.

The telephone line state detection: telephone line state

detection work in (idle, ring, hook) and distinguishing the TIP or

RING line.

Continuous (pass) detection of conductors.

Connection between network cable and switch port.

It has the function of low voltage prompt, and the receiver

has the function of illuminating lamp.

Symbolic description

Important safety information should be read

before use. Incorrect use may cause damage

to the equipment or its components.

Ground

Double insulation protection

CAT Ⅱ

Class II measurements are suitable for testing

and measuring circuits directly connected to

power points (outlets and similarities) of low

voltage power supplies.

CAT Ⅲ

Class III measurements are suitable for testing

and measuring circuits connected to

distribution parts of buildings with low voltage

power supplies.

CAT Ⅳ

Class IV measurement circuits for testing and

measuring power connections to building low

voltage power supplies.

Summary of content (6 pages)

PAGE 1
Safety instructions RJ45 and BNC interface cable, and can find the line of other In order to avoid and prevent electric shock, burns or personal metal wire through adapter. injury, please read this manual carefully. When the cable line is searched, it is not necessary to peel Note: the condition that may cause damage to instrument or error off the outer line of the line, so it is simple, fast and can judge the detection results. location of the breakpoint of the line.
PAGE 2
Description of each part of the instrument 12 Audio output indicator: when the audio signal is output, the lamp is lighted. 13 Telephone line status indicator: This is a two color lamp, the phone will display red or green in different working states, or display different colors when the level is detected. 14 RJ11 port: telephone working state, level detection and other metal wire alignment interface.
PAGE 3
⑤ The knob to change the volume can be adjusted by adjusting the size of the volume on the receiver in the detection process, but also through the transmitter on the " " button to change the audio frequency from the transmitter, in order to adapt to the actual environment. ⑥ If a lot of noise or sound receiver is very small, please use the clip attachment into the RJ45 or RJ11 interface, and the clip on the ground (such as water, buildings or equipment grounding metal shell etc.
PAGE 4
2、Cable detection: The 1-2 and 3-6 lines are lighted on the indicator light, and the Line detection is open circuit, short circuit, reverse, right and short indicator light is lighted. wrong, on condition of detection around the physical connection Be careful： cable.
PAGE 5
③ volume control knob to the position of the maximum volume, if If the telephone line status indicator (in the middle position of dial button switch on the light green), said the you don't hear a sound receiver, please replace the batteries. telephone line is idle; if not on the telephone line is off hook state; General technical index if the light green or red and regular flashing said telephone line in  ringing state.
PAGE 6