User manual

1.Soundcard converts digital data of computer into sound and delivers to speaker. Or it
inputs
external analogue sound or microphone sound into computer.
2.Soundcard consists of 3 parts: line-out(green), line-in(blue) and microphone terminal
(pink)
and number of line-outs decides soundcard channel. (Terminal order is different from
manufacturers.)
A. 2 Channel soundcard : output sound with right and left speaker.
B. Multi-channel soundcard : output sound with rear, center, etc except 2 channels.
3.In case of multi-channel, main(front) lineout is green, another lineout(rear or center) is
another color. In this case, there are one linein and microphone terminal.
4.Onboard soundcard means soundcard is combined with main board and function is same
5.Line-in terminal to get input external sound sources is used for Plusdeck2 or TV receiver
card.
Through this terminal, soundcard of computer gets input external sound signal and
outputs to speaker or converts into digital files.
6.Microphone to get input voice with mic is different input from line-in.
2. Understanding about Connection Card
1.Provided connection card of Plusdeck2 is 20 pin cable, consist of part A to connect with
inside
of computer, part B to connect with serial port of computer and part C to connect with
soundcard.
D switch is to change electricity flaw in case of electronic noise of computer is
serious. In case of much electronic noise, change Open/Short.
2.Functions of connection card are following.
A. Terminal to be connected with speakers and output computer sound and tape
sound.
B. Terminal that Output sound of computer is input to Plusdeck2.
It is connected with lineout of soundcard. In case of multi-channel sound card,
main or
front lineout among several lineouts is connected.
C. Terminal to output sound of tapes in Plusdeck2. It is connected with linein of
soundcard.
D. Terminal to be connected with microphone of Plusdeck2 front side. It is connected
with
microphone of soundcard.
3.Speaker has to be connected with speaker out of connection card, not lineout of
computer.
4.Sound inputted to tape in is recorded onto tape.
5.Sound from tape out is inputted to soundcard linein and is outputted with speaker out or
converted into digital files inside of computer.
6.If you connect headphone in front of Plusdeck2, sound isn't inputted with speaker out.