User manual

- Auto Reverse is supported when recording with Plusdeck. So, you can record onto both
sides
A and B without ejecting.
-
Both sides are recordable, so you have to choose where to start. You can press the record
button and either A or B to choose the side to record on.
1.Insert a recordable blank tape and press button A of waiting record. Then, red LED and
green
LED of recordable side are flickered. (on the side without elimination revent tab is not
recordable and if both sides are recordable, green LED is flickered.)
If the dial is turned all the way to the left, there will be no sound.
See next.
If you connect a microphone to this terminal, sound goes to the soundcard input. If
you record onto a cassette tape, using Plusdeck’s mic jack, the sound is dubbed from
the computer and then recorded onto tape. This mic terminal supports stereo
microphones as well as mono.
You can hear all sound from the computer or a playing cassette tape with a headphone
connected to the Plusdeck headphone terminal. (If the soundcard is not connected with
connection card, the computer sound will not be heard.)
1. Insert tape as shown on the picture to the left.
2. If you insert tape about 2-3cm,
tape will automatically slide in.
3. Do not force or push tape in.
4. Insert tape with side A facing up.
5. It is normal for the flap to look slightly open when a
cassette is inside the Plusdeck2.