User manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. Making space for the Plusdeck2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2. Installing Plusdeck2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3. Connecting the 20 Pin Cable
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4. Connecting the Power Cable
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5. Attaching the connection card
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6. Attaching the connection card and
Plusdeck2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7. Completing the Installation
Caution
-Be sure to switch off power off and unplug the computer before installation.
Failure to do so can cause electrical shock.
1. Separate the computer mainframe from the case.
2. Be careful of sharp objects inside of the computer.
3. Remove the 5.25” bay place holder from the case.
Note
-Consult you computer manual on the proper method of opening your computer and
removing
the 5.25 inch bay faceplate. This will differ based on the manufacturer.
-If you are uncertain or not comfortable with this first step, please consult a professional.
1. Fully insert Plusdeck2 into the free bay
space.
2. Be sure there is enough space around the
Plusdeck2, so it is not touching any internal
parts.
3. If you need a horizontal holder to install at
5.25” bay, contact the computer
manufacturer. (A horizontal holder is not
included with Plusdeck2)