User manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. Connect with Soundcard
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2. Connect Serial Cable
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3. Soundcard and Connection card
information
1. Connect connection card serial port and computer serial port with provided serial cable
(RS-232C).(Serial port is also called COM port.)
2. Port on soundcard is midi connection port. It has different shape and usage, so it can't
be
connected to serial cable. Serial port is usually nearby printer port.
3. This cable is for communication between Plusdeck2 and software. If you don't connect
this,
Plusdeck2 doesn't work with software and if you run software, you can see a notice
about
connection error.
4. You must connect with provided cable. If you use shape-like cable like 9 pin, it doesn't
function normally because it has different pin arrangement.
5. Cable which alters serial port into USB can't be used because it can't transmit and
receive
signal normally. If pin around connection part is bent or damaged, it doesn't work
normally.
6. If pin around connection part is bent or damaged, it doesn't work normally.
7. Even though it is connected, it can't communicate program if serial port of computer is
set up
as unable to use at CMOS or if hardware is out of order. In this case, set up serial
port as
able to use at CMOS or get after-sale service from computer manufacturer. (You can re-
set
up in set screen when computer is turned on and should change Onboard Serial Port into
enable. If you want more detail, contact main board manufacturer.)
1. Understand about Soundcard