Instructions / Assembly

Product Instructions

Description: Dual-Flow Spray Aerator

Model#: 37.0081.98

SKU#: 703476

• 15/16” x 55/64”-27 Thread

• 0.5 gpm spray / 2.2 gpm stream

• Easy Installation

Visit us at www.neoperl.com/consumer and make changing your aerator part of your yearly faucet maintenance.

INSTRUCTIONS:

1. Remove old aerator from faucet. Use wrench if

necessary.

2. Remove any old washers that might be caught

inside the spout.

3. Clean the threads on faucet for easier installation.

4. For faucets with outside threads, unscrew adapter

from spray. For faucets with inside threads, keep

adapter in place. Install onto spout by hand.

5. Turn on faucet. If leak occurs, tighten more firmly.

INSTRUCCIONES:

1. Quite el viejo aireador del grifo. Utilice una llave

inglesa de ser necesarioo.

2. Quite todas las arrandelas viejas que pudieran

haber quedado atrapadas dentro del surtidor de agua.

3. Limpie las roscas del grifo para una instalación más

fácil.

4. Para grifos con roscas externas, desenrosque el

adaptador del rociado. Para grifos con roscas

internas, umantenga el adaptador en su lugar. Instale

en el surtidor de agua en forma manual.

5. Abir el grifo. Si ocurre un escape, ajuste más

firmemente.

For male faucets with outside threads:

For female faucets with inside threads:

PAGE 1
Product Instructions Description: Dual-Flow Spray Aerator Model#: 37.0081.98 SKU#: 703476 • 15/16” x 55/64”-27 Thread • 0.5 gpm spray / 2.2 gpm stream • Easy Installation For male faucets with outside threads: For female faucets with inside threads: INSTRUCTIONS: 1. Remove old aerator from faucet. Use wrench if necessary. 2. Remove any old washers that might be caught inside the spout. 3. Clean the threads on faucet for easier installation. 4. For faucets with outside threads, unscrew adapter from spray.