Product Brochure

7
Instructions
Specialty Aerators
1.2 gpm Household Kit
4 - Regular Aerator Inserts;
8 - Regular Washers (4 male &
4 female); 1 - Aerator Wrench
1 pack- Store SKU 1001533901
1 pack- Online SKU 206590036
1.5 gpm Household Kit
4 - Regular Aerator Inserts;
8 - Regular Washers (4 male &
4 female); 1 - Aerator Wrench
1 pack- Store SKU 705951
1 pack- Online SKU 203673001
1.2 gpm Water Saving Value Pack
1 - Double Swivel;
2 - Dual Thread Aerators
1 pack- Online SKU 206592425
1.5 gpm Water Saving Value Pack
1 - Double Swivel;
2 - Dual Thread Aerators
1 pack- Store SKU 741372
1 pack- Online SKU 203673040
1.2 gpm Advantage Pack
1 - Softgrip Swivel;
2 - Dual Thread Aerators
1 pack- Online SKU 206592472
1.5 gpm Advantage Pack
1 - Softgrip Swivel;
2 - Dual Thread Aerators
1 pack- Store SKU 797186
1 pack- Online SKU 203673042
Drought Kit
1 - 1.5 gpm Softgrip Swivel;
1 - 1.5 gpm Dual Thread Aerator;
1 - 2.0 gpm Shower Flow Controller
1 pack- Online SKU 203780172
1.2 gpm meets California residential bathroom requirements. 1.5 gpm meets California kitchen requirements.
NEOPERL products meet
all the requirements for
non-toxicity developed and
recognized at the national
level by NSF International
for public health and safety.
NEOPERL products are
tested and listed directly at
NSF's labs.
Insert installation:
1. Unthread old aerator from faucet and remove
washer and insert.
2. Place new aerator insert into the original housing.
3. For housings with inside threads, use thinner
washer. For housings with outside threads, use
thicker washer.
4. Install onto spout by hand. If leak occurs, tighten
more firmly.
Male or Female installation:
1. Unthread old aerator from faucet.
2. Install onto spout by hand. If leak occurs, tighten more
firmly.
1. Remove showerhead.
2. Apply plumber’s tape to
threads.
3. Install adapter onto spout by
hand. Reconnect showerhead.
4. Turn on shower. If leak occurs,
tighten more firmly.
Shower Flow Controller installation:Dual thread installation:
1. Unthread old aerator from faucet.
2. For housings with inside threads, use thinner
washer. For housings with outside threads, use
thicker washer.
3. Install onto spout by hand. If leak occurs, tighten
more firmly.