Owner manual

6 Operation
33 B-390 Operation Manual, Version C
The light intensity of the stroboscope lamp and amplitude
( = intensity) of the vibration can be set from 1 to 9. Above
a frequency of 1500 Hz the amplitude can be set from 1
to 12. By increasing the amplitude the vibration becomes
stronger. Values above 3 are mainly for solutions with
viscosity > 100 mPa s. Pressing on the (+) and (-) buttons
will immediately change the parameters.
Pressing the “Esc”-button will cause a return to the start
menu and the set value will be kept.
Screen 6-5: More options concerning amplitude of vibration
and light Intensity of the stroboscope lamp.
6.3 Menu structure of the control unit
The figure below shows a schematic overview of all menus of the Encapsulator B-390, each with the
available functionality.
Heating [°C]
Heating On/Off
Set Temperature
Main menu
FrequencyOn/Off
ElectrodeOn/Off
Store function
Set Freq. | Set Elect. | Set Heat.
Electrode [V]
ElectrodeOn/Off
Set Electrode
Frequency[Hz]
FrequencyOn/Off
Set Frequency
more Frequency
Set Light Intensity
Set Amplitude
HeatingOn/Off
More
|
Figure 6-1: Menu structure of the control unit