Owner manual

9 Shutdown, storage, transport and disposal

50 B-390 Operation Manual, Version C

9 Shutdown, storage, transport and disposal

This chapter instructs how to shut down and to pack the instrument for storage or transport. Speciﬁ-

cations for storage and shipping conditions can also be found listed here.

9.1 Storage and transport

Switch off the instrument and remove the power cord. Wait until all hot parts (e.g. heating block and

carrier plate) have cooled down.

To disassemble the Encapsulator B-390 follow the installation instructions in section 5 in reverse

order. Remove all liquids and dusty residues before packaging the instrument.

Warning

Death or serious poisoning by contact or incorporation of harmful substances.

• Wear safety goggles

• Wear safety gloves

• Wear a laboratory coat

• Clean the instrument and all accessories thoroughly to remove possibly dangerous substances

• Do not clean dusty parts with compressed air

• Store the instrument and its accessories at a dry place in its original packaging