Operating instructions
FIGURE 7
7.
Set the top trim panel In place and
mount
the same as the side panels.
8.
Slide the BUCK STOVE back
Into
the fireplace. Check
to
be sure that the
trim
panels are pro·
perly positioned and lie
flat
against
the front
of
the fireplace.
If
one
or
more
of
the panels is
out
of
position,
slide
the stove
out
and reset by loosening the
mounting
screws and reposi·
tloning in the slot. (See Figure
7)
CHECKING TRIM
PANEL ADJUSTMENT
MINIMUM
CLEARANCE
FOR
BUCK
STOVE
FIREPLACE
INSERTS
MODIFIED
TRIM
KIT.
FIGURE 8
INSTALLED
MINIMUM
CLEARANCES
Figure 8 shows a Buck Stove Fireplace Insert
with
a modified trim kit, installed in a masonry
fireplace showing
minimum
clearances for Georgian or Colonial type wood trim, on a masonry
fireplace.
If wood trim is desired around the fireplace front, modify the trim kit
as
shown
in
the
bending
modification
tip on the following page. With
modification
on the stove trim kit, there
must
be
a minimum of
6"
from the cold air intake to side wood trim, and 8
1
12"
from stove top to
top wood trim. Wood trim should not exceed
J!.I"
thick.
Page 9