User's Manual

19
FLIGHT MODE AND ALERTS
Your Communications Clip can be placed in a standby
mode, designed to meet FAA requirements for turning off
cellular devices during aircraft travel. To enter Flight Mode,
press a single button on either the Clip or the Wristband
five times in a row. Each press will be accompanied by a
brief vibration pulse. To signal you have successfully set the
Clip in Flight Mode, the LED on both units will blink purple.
To exit Flight Mode, press and hold one button on Clip or
Wristband. This will need to be done for BOTH units.
Flight Mode can also be initiated from the Flight Mode icon
within the Wearer section of the Link–Mobile Dashboard.
LINK–MOBILE DASHBOARD
The Link–Mobile Dashboard provides anytime access to
defining a host of parameters for your Link–Mobile system
use. To provide access to the Dashboard, Care Innovations
sends a hyperlink to the original purchaser’s (called the
Dashboard Manager) email as part of the welcome email or
one may visit www.Link–Mobile.com. NOTE: On your first
use, click on the Profile icon to add telephone details and
select your own password. Click update when done. Your
Link–Mobile system is activated and assigned to the Wearer
identified at the time of purchase. The Dashboard Manager
is able to use these Icons:
Create a list of Users who are granted access to
the Dashboard (restricting what users can see
and what they may change).
Locate — a Wearer’s Clip on a street and satellite
map to see current and past locations, routes
taken, battery level and charging status.
Notifications — See a history of Alerts
including GSM and GPS strength and
charging status.
USING LINK–MOBILE