Instructions / Assembly

BATTERY
REPLACEMENT WARNING
If the batteries are low, the red “low battery
light” will warn you immediately. To test the
batteries, just input your personal code to
open the door. If the batteries are low, the
red light will be on; replace the batteries and
reprogram the safe using steps 6-9. NOTE:
You must reprogram the code EVER
Y
TIME after replacing batteries.
OVERRIDE INSTRUCTION TO OPEN THE
SAFE
For your convenience, we have engineered
a manual override system for your safe. If
you forget or misplace your code follow
the steps below:
1. To open the safe, remove the small center
cover plate on the front panel.
2.Insert the key into the keyhole and turn it in
a counter-clockwise direction. Turn the knob
in a clockwise direction and pull.
INSERTING THE NUMBER GUIDES
Printed numbers guides have been included
with your key safe for easy key identification.
Take the guide printed with numbers 1-10
and slip it into the slots above the top row of
key hooks on the inside of the safe, numbers
facing out. Repeat with the next set of num-
bers in the next (lower) slot until you have
used all the guides and all the key hooks are
numbered.
cont. on next page
Battery replacement
warning light
Installing number guides
3
OPERATING INSTRUCTIONS
#3221 Electronic Key Safe
4
INSTALLING THE SAFE
To reduce the risk of theft to the safe, it can
be secured to the wall or in a cupboard. For
your convenience, there are six 8 mm diam-
eter holes. The safe can be fixed to a sur-
face using the screw and expansion bolts
provided.
Installation holes
Hardware:
includes
4 sets of
each
CAUTION: DO NOT STORE KEYS IN THE SAFE!
Refer to Template Installation Instruction
Sheet, included with this safe, to com-
plete safe installation.
Buddy Products
1350 S. Leavitt St.
Chicago, IL 60608
toll-free: 800-886-8688
local: 312-733-6400
fax: [phone]
web: www.buddyproducts.com
e-mail: [e-mail]
Touch up paint is available for safes, please contact Buddy Products
to order.
OPERATING INSTRUCTIONS
#3221 Electronic Key Safe