User Guide

Applications manual
| 5
Panel Radiator
Applications Manual
Panel Radiator Applications Manual | 07.2017 Technical specifi cations are subject to change without prior notice
2. Safety
2.1. Explanation of symbols
Warnings
Warnings in this document are identified by a
warning triangle printed against a grey
background.
Keywords at the start of a warning indicate
the type and seriousness of the ensuing risk if
measures to prevent the risk are not taken.
The following keywords are defined and can be used in this docu-
ment:
 DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
 WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
 CAUTION indicates a hazardous situation which, if not
avoided, could result in minor to moderate injury.
 NOTICE is used to address practices not related to personal
injury.
Important information
Important information in cases where there is no
risk of personal injury or material losses is identified
by the symbol shown on the left. It is bordered by
horizontal lines above and below the text.
2.2. Please follow these instructions
Only use original Buderus spare parts.
Damage caused by the use of spare parts other than
original Buderus spare parts is not covered by the product
warranty.
2.3. Tools, materials and accessories
For the installation of panel radiators, you will need
standard tools used for central heating, boiler and DHW
water systems.
2.4. Disposal
● Dispose of the packaging in an environmentally
responsible manner.
— Dispose of defunct components through an
authorized agent in an environmentally responsible
manner.
2.5. Disclaimer
Improper installation, setup, modifi cation,
operation or maintenance of the heating system can
cause personal injury and property damage. Follow
each appliances‘ instructions precisely. For assistance
or further information, contact a trained and certifi ed
installer, service provider, or the gas supply company.
Application drawings in this manual are conceptual
only and do not purport to address all design,
installation, code, or safety considerations. The
diagrams in this manual are for reference use by code
offi cials, designers and licensed installers. It is
expected that installers have adequate knowledge of
national and local codes, as well as accepted industry
practices, and are trained on equipment, procedures,
and applications involved. Drawings are not to scale.
Refer to the boiler, control and module installer
manuals for additional detailed
information!