Installation Manual
Table Of Contents
- Contents
- 1 Safety Considerations and Symbol Descriptions
- 2 Product description
- 3 Moving the boiler
- 4 Installing the boiler
- 5 Installing the boiler
- 6 Commissioning the heating system
- 6.1 Bringing the system up to operating pressure
- 6.2 Checking the safety valve
- 6.3 Checking position of heat exchanger baffles
- 6.4 Preparing the heating system for operation
- 6.5 Starting up the control and the burner
- 6.6 Notes on commissioning the burner
- 6.7 Raising flue gas temperature
- 6.8 Manual reset high limit (STB)
- 6.9 Installing the burner door jacket
- 6.10 Commissioning log
- 7 Shutting down the heating system
- 8 Heating system servicing
- 9 Troubleshooting
- 10 Installation examples
- 11 Parts lists
- 12 Circuit diagrams
- Index
2
Product description
Logano G115 WS US/CA – 6 720 813 418 (2019/09)6
2.5 Product description
The boiler is a low-temperature oil-fired appliance with automatic
control panel or aquastat for boiler water temperature.
The boiler consists of:
• Boiler heat exchanger with insulation
• Boiler jacket
• Control panel or aquastat
The controls monitor and control all electrical boiler components.
The boiler can alternatively be fitted with a simple aquastat control.
The boiler jacket prevents heat loss and acts as a noise insulator.
The boiler heat exchanger transfers the heat generated by the burner to
the heating water. The insulation prevents energy loss.
Suitable burners
Fig. 1 Boiler without burner
[1] Control panel R2107 (sold separately)
[2] Boiler jacket
[3] Boiler heat exchanger with insulation
[4] Burner door
[5] Burner door panel
CAUTION: Risk of system damage from use of incorrect
burner.
▶ Only the burner provided may be employed with this
boiler.
6 720 615 225-01.1RS
1
2
3
4
5