Install Instructions

4
Installing the boiler
Logano G115 WS US/CA – 6 720 813 418 (2014/10)16
4.3 Mounting the adjustable feet (included with B-kit)
Level the boiler with the adjustable feet to prevent air pockets forming
inside the boiler.
Requirement: the burner hood/burner door panel must have been
removed first ( Chapter 3.1, page 12).
▶ Tilt the boiler with the aid of a hand truck or trolley
( Chapter 3.3, page 13) or place a wooden batten underneath it.
▶ Screw in adjustable feet ¼ " – 3/8".
▶ Gently set the boiler down.
Fig. 10 Fitting adjustable feet
[1] Angle bracket
[2] Adjustable feet
4.4 Positioning and leveling the boiler
▶ Position the boiler in its final location.
▶ Level the boiler horizontally by turning the adjustable feet and using
a level.
Fig. 11 Leveling the boiler horizontally
If the boiler is mounted on top of a horizontal hot water
tank, the adjustable feet are not needed.
7 747 019 141-10.1RS
1
2
Protect boiler connections from damage and dirt if the
boiler is not installed immediately.
7 747 019 141-11.1RS