Install Instructions

Boiler installation 8

We reserve the right to make any changes due to technical modifications.

Installation and maintenance instructions Logano G215 US oil/gas-fired boilers • Issue 2014/10

8.8.3 Electrical connections and connection of additional components

Install a permanent electrical power connection in

accordance with local codes.

z Route all cables through the cable entries to the

Logamatic control panel and connect in accordance

with the wiring diagram.

8.8.4 Strain relief installation

Secure all cable runs with cable ties (included with the

control):

z Insert the cable ties together with the cable from the

top into the slots of the clamp frame (step 1).

z Push the cable tie down (step 2).

z Push against the tie (step 3).

z Flick the toggle up (step 4).

8.9 Jacket panel installation

z Locate and secure the Logamatic control panel top

device cover.

z Fit the rear boiler cover.

WARNING!

RISK OF FIRE

Hot components may damage electrical

wiring.

z Ensure that all wiring is routed in the

ducts provided or on the boiler

insulation.

Fig. 56 Securing cables with cable ties

Fig. 57 Install the back boiler cover

1 Control panel cover

2 Back boiler cover