Installation Instructions

Installing the boiler

Logano G115 WS US/CA - Technical specifications are subject to change without prior notice.

4.3 Mounting the adjustable feet (included with B-kit)

Level the boiler with the adjustable feet to prevent air

pockets forming inside the boiler.

Requirement: the burner hood/burner door panel must

have been removed first (Æ Chapter 3.1, page 12).

V Tilt the boiler with the aid of a hand truck or trolley

(Æ Chapter 3.3, page 13) or place a wooden batten

underneath it.

V Screw in adjustable feet ¼" – 3/8".

V Gently set the boiler down.

Fig. 10 Fitting adjustable feet

1 Angle bracket

2 Adjustable feet

4.4 Positioning and leveling the boiler

V Position the boiler in its final location.

V Level the boiler horizontally by turning the adjustable

feet and using a level.

Fig. 11 Leveling the boiler horizontally

If the boiler is mounted on top of a horizontal

hot water tank, the adjustable feet are not

needed.

7 747 019 141-10.1RS

Protect boiler connections from damage and

dirt if the boiler is not installed immediately.

7 747 019 141-11.1RS