Installation Instructions

5
Installing the boiler
Logano G115 WS US/CA - Technical specifications are subject to change without prior notice.
27
5.8.3 Connecting the power supply and additional components
Establish a permanent connection to the mains power
supply in accordance with the locally applicable regula-
tions.
V Route all cables through the cable entries to the control
panel and connect in accordance with the wiring dia-
gram.
5.8.4 Fitting cable ties
Secure all cable runs with cable ties (included with the
control):
V Insert the cable ties together with the cable from the
top into the slots in the frame (step 1).
V Slide the cable ties downward (step 2).
V Push against the ties (step 3).
V Flip the toggle up (step 4).
Fig. 24 Securing cables with cable ties
5.9 Fitting outer casing panels
V Position and secure the control device cover.
V Fit the rear boiler cover.
V Secure by reinstalling cover screws and jacket panel
screws.
Fig. 25 Fitting the rear boiler cover
1 Controls cover
2 Rear boiler cover
Warning: Fire hazard from hot boiler compo-
nents.
Hot boiler components may damage electri-
cal cables.
V Ensure that all wiring is routed in the ducts
provided or on the boiler insulation.
7 747 019 141-25.1RS