Operating instructions

First steps with your RC30 5
18 Operating instructions RC30 programmable room thermostat • Issue 02/2006
We reserve the right to make any changes due to technical modifications.
Additional menu (Chapter 9, page 56)
5.3 Switching on and off
The RC30 is powered by the heating system and is permanently
switched on. It is only switched off if the heating system is switched
off, e.g. for maintenance purposes.
The power consumption is designed for this constant operation
and at 0.3 W is very low (0.6 W with background lighting).
To switch the heating system on or off, set the ON/OFF switch on
the base controller (Fig. 4, Item 1) to position "1" (ON) or "0"
(OFF).
Buttons Menu Menu
HOLIDAY THERM DISINF
BNK HOLIDAY STD DISPLAY
CALIBRATION KEY LOCK
PARTY SU/WI CHANGE
PAUSE SU/WI TIME
+
Press the "Time" and "weekday"
buttons at the same time to open
the additional menu.
+
Fig. 4 Base controller BC10
Item 1: ON/OFF switch on base controller
1
USER NOTE
The settings in the RC30 are retained for approximately 10 hours
in the event of a power cut (or system shutdown).