Operating instructions

Basic functions7
24 Operating instructions RC30 programmable room thermostat • Issue 02/2006
We reserve the right to make any changes due to technical modifications.
7.3 Setting the room temperature
The room temperature applies to the currently active heating
mode, i.e. day or night mode. The currently active heating mode is
indicated by an illuminated green LED.
7.3.1 Setting the room temperature for the current operating
mode
Condition: The RC30 flap is closed.
You are currently in automatic "Day" mode and would like to alter
the room temperature.
Set the required room temperature by turning the dial. Turning the
dial clockwise increases the value, turning anti-clockwise reduces
the value.
The newly selected room temperature will be saved after approx.
2 seconds. Then the selected standard display will be shown
again.
To adjust the room temperature with the flap open, you must press
either the "Day mode" or "Night mode" button whilst turning the
dial.
SET
ROOM TEMP
21.0
°
USER NOTE
Changing the set room temperature moves the heating curve up
or down in parallel (see "How does the RC30 work?", page 5).
USER NOTE
Any adjustment applies to all heating circuits allocated to the
RC30 (see Chapter 8.7 "Changing settings for another heating
circuit", page 37).