Operating instructions

Extended functions8
40 Operating instructions RC30 programmable room thermostat • Issue 02/2006
We reserve the right to make any changes due to technical modifications.
8.9 Selecting a preset heating program
The RC30 comes with eight different preset heating programs. See
the next page for a summary of the time settings for the preset
heating programs.
Please check which heating program best meets your
requirements. In particular, check the number of switching points
and then the times. The "FAMILY" program is factory pre-set.
Each programme can be adjusted or you can enter a specific
programme to meet your exact needs.
Select a heating circuit (see Chapter 8.6 "Selecting a heating
circuit", page 35).
Press and hold down the "Prog" button.
Initially the heating circuit for which you want to select a heating
program will be displayed. Two seconds later the name of the
currently set heating program will be displayed.
Select the desired heating program using the dial.
Release the "Prog" button. The newly selected heating program is
stored and the first switching point is displayed.
Press "Back". The display returns to the standard display.
+
PROG SELECT
FAMILY
USER NOTE
The selected heating program is only effective if automatic mode
is set (see Chapter 7.2.1 "Selecting automatic mode", page 21).