Operating instructions

Extended functions 8
43
We reserve the right to make any changes due to technical modifications.
Operating instructions RC30 programmable room thermostat • Issue 02/2006
Hold down the "Prog" button and select the required heating
program with the dial.
Release the "Prog" button.
The first switching point (Monday, 05:30) appears.
Hold down the "Time" button and select the required time with the
dial. Example: "06:00".
Release the "Time" button. The new time for the "On" [start "day
mode"] switching point is now saved.
Continue to turn the dial until the next switching point is displayed.
The "Off" [start "night mode"] switching point for Monday then
appears. Now you can modify the time for the "Off" switching point.
Hold down the "Time" button and select the required time with the
dial. Example: "23:00".
Release the "Time" button. The new time for the "Off" switching
point is now saved.
– To add more switching points, refer to section 8.13
– To delete switching points refer to section 8.14
+
PROG SELECT
FAMILY
SWITCH POINT
ON MO
05:30
+
+