Operating instructions

Extended functions 8
47
We reserve the right to make any changes due to technical modifications.
Operating instructions RC30 programmable room thermostat • Issue 02/2006
8.13 Adding switching points
You can also add one or more switching points to an existing
heating program.
z Select a heating program (see Chapter 8.9 "Selecting a preset
heating program", page 40).
The first switching point (Monday, 05:30) appears.
USER NOTE
The next switching point is not displayed until you have entered
the day or group of days, time and operating mode (switch state).
You can enter them in any sequence.
If you press the "Back" or "AUT" button whilst entering a switching
point, a switching point that has been partially entered will be lost.
Make sure that you enter an OFF switching point for every ON
switching point so that the heating system can also switch back to
night mode.
Fig. 9 Adding switching points to interrupt a heating phase
"FAMILY"
Day "Normal" mode
Night "Reduced"
mode
New "OWN PROG" program
Day "Normal" mode
Night "Reduced"
mode
5:30 22:00
5:30 10:00 13:00
22:00
SWITCH POINT
ON MO
05:30